Chauvet COLORado 1 IP Uživatelský manuál stáhnout pdf (Strana 11)

Setup

COLORado™ 1 IP User Manual Rev. 2 -7-

Mounting

Before mounting this product, read and follow the Safety Notes in this manual.

Orientation

Always mount this product in a safe position and make sure there is adequate room for

ventilation, configuration, and maintenance.

Rigging

The COLORado™ 1 IP consists of a sealed (IP66) housing with a double bracket mounting

yoke. It has two DMX signal cables (DMX In/DMX Out), and two power cables (Power

In/Power Out), all of them fitted with proprietary IP66 connectors. CHAUVET®

recommends using the following general guidelines when mounting this product.

• When selecting an installation location, consider easy access to this product for

operation, programming adjustments, and routine maintenance.

• Make sure to mount this product away from any flammable material as indicated in the

Safety Notes.

• Never mount in places where rain, high humidity, extreme temperature changes, or

restricted ventilation may affect the product.

• If hanging this product, make sure that the mounting location can support the product’s

weight. Refer to the Technical Specifications chart for the weight-bearing requirements

of this product.

• When hanging this product, always secure to a fastening device using a safety cable

(included).

Procedure

The COLORado™ 1 IP comes with double bracketed mounting yoke to

which you can

attach clamps. These brackets also serve as floor stands or wall-mount supports. You

must supply your own clamps and make sure the clamps

are capable of supporting the

weight of this product.

Product Mounting

Diagram

Overhead Mounting

Floor Mounting

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 27 28

Žádné komentáře

Chauvet COLORado 1 IP Uživatelský manuál Strana 11