Chauvet COLORado 1 IP Uživatelský manuál stáhnout pdf (Strana 17)

Operation

COLORado™ 1 IP User Manual Rev. 2 -13-

Whites Setting

This setting allows you

to select and edit the temperature of the white colors used in

channel 11 (Macros) when in the TOUR mode. You can also

define the maximum RGB

values when RGB to White (RGbw.) is active.

1. Go to CAL1.

2. Select a white color (Wt.01~11).

3. Select a color (R., G., b., or w.).

4. Select a color value (000~255).

5. Repeat for the other colors.

When selecting RGbw., you will only be able to define the values of Red, Green, and

Blue.

The values of Red, Green, and Blue configured from CALIB > RGbw. will define the

color temperature shown when the RGB faders are set to 255 if SETTING > COLOR >

RGbw. is active.

White Calibration

This setting allows you to select the white color shown by the COLORado™ Range IP

when the color setting is RGbw. and the DMX controller’s Red, Green, and Blue faders

are set to “255.”

1. Go to the CAL2 > RGbw. level.

2. Select a color (R., G., or b.).

3. Select a color value (000~255).

4. Repeat for the other colors.

When selecting CAL2 > RGbw., you will only be able to define the values of Red,

Green, and Blue.

The values of Red, Green, and Blue configured from CAL2 > RGbw. will define the

color temperature shown when the RGB faders are set to “255” if SET > COLO >

RGbw. is active.

1 2 ... 12 13 14 15 16 17 18 19 20 21 22 ... 27 28

Žádné komentáře

Chauvet COLORado 1 IP Uživatelský manuál Strana 17