
7. Chases - Page 167
Pearl 2008 Manual - 16th July 2007
deleted.
7.6.4 Viewing timing information
You can view the timing settings of a connected chase by pressing
View then Connect. (when View is set to LCD views; if the top line of
the display shows “VDU views” when you press View, press G [LCD
views])
For each step, the first line shows the step number, whether links are
off or on for that step (Off=”-”, On=down arrow), and whether the step
is Simple (S) or Complex (C).
The second line shows the Wait In, Wait Out and LTP Wait times for the
step.
The third line shows the Fade In, Fade Out and LTP fade times for the
step.
The active step is always at the top of the list, and the list moves up as
the chase runs.
A similar display can be shown on the VDU screen by pressing View,
then G [VDU
views] then
Connect.
At all times when
a chase is running,
the bottom of the
screen shows
bargraphs which
show the progress
of the wait and fade times.
The left hand section of the bargraphs
shows the Wait timers. The right hand
section shows the Fade timers.
To the left of the bargraphs are
numbers which give the wait or fade
progress as a countdown from 9 to 0.
The bottom left of the VDU screen shows similar bargraphs when a
chase is running. The progress figures are to the right of the bargraphs
and are given as a
99 to 00 countdown.
“N” is the next step
and “L” is the live
step.
7.6.5 Sound activation of chases
The Pearl can use bass, mid or treble frequencies from its audio input
to trigger chases. You can select whether the chase will step on low
frequencies, mid frequencies or high frequencies.
1> Turn on the chase (or Connect it) and press A [Chase parameters]
Next ste
number
Current step number
Chase number
Wait In”
ro
ress
Wait Out”
ro
ress
LTP Wait
ro
ress
“Fade Out” progress
Fade In”
ro
ress
LTP fade
ro
ress
Wait timers
Fade timers Progress %
Komentáře k této Příručce