Chauvet Tiger DMX 60 Návod k obsluze stáhnout pdf (Strana 150)

Page 182 - 9. The graphics tablet

Pearl 2008 Manual - 16th July 2007

The tablet has a selection of other function pads down the right hand

side, including Locate Fixture, Flip, Select All, Clear (programmer), Off,

Record Memory etc. These have the same functions as pressing the

appropriate button on the Pearl.

You can create a group using the tablet, just select the fixtures you

want in the group, press the pen on the Record Group pad, then on the

group pad where you want to save the group.

The Release Fixture pad is similar to clear, but it only removes from the

programmer fixtures which are selected.

The DeLatch Fixtures pad deselects a fixture but leaves any changes in

the programmer.

The F4 and F5 pads provide special functions on fixtures which have

been trained for Tracking:

• The F4 pad moves positioning between selected fixtures. On each

press of the pen on this pad, all selected fixtures will take on the

position of the next fixture. For example if 3 fixtures are selected,

then fixture 1 will move to the XY position of fixture 2, 2 to 3 and

3 to 1.

• The F5 pad provides circle open-close movement on a range of

fixtures. If the pen is placed on this pad and moved in a forward

direction, the spot cast on the stage by the selected fixtures, will

move outwards from a centre point. The centre point is the

average XY position of the spots. For example, if the spots are

arranged in a circle then the circle will expand. If the pen is moved

downwards then the spots will move towards and through the

centre point. In the example of the circle, the circle will shrink,

cross through the centre and expand in the opposite direction.

The arrow pads simulate the cursor arrow buttons on the console.

Other pads in this area, and the Mouse Pad area above, are for future

expansion.

9.1.9 Tablet status on the VDU monitor

In the top right hand corner of the VDU monitor are 3 letters, T A and

N, which mean the following when they are lit up:

T: Tracking mode is enabled

A: Absolute position mode is enabled

N: Nudge mode is enabled

9.2 Advanced options

9.2.1 Extending the tablet cable

You can extend the tablet cable either with a 25-pin D straight through

cable, or an RJ45 extension cable if the tablet is fitted with an RJ45

connector.

An Avolites Riggers Remote cable can be used if modified so that pin 25

is connected straight through.

An RJ45 extension cable must be connected straight through with an

RJ45 plug on one end and an RJ45 trailing socket on the other end.

1 2 ... 145 146 147 148 149 150 151 152 153 154 155 ... 205 206

Komentáře k této Příručce

Žádné komentáře

Chauvet Tiger DMX 60 Návod k obsluze Strana 150

Komentáře k této Příručce