Chauvet Tiger DMX 60 Návod k obsluze stáhnout pdf (Strana 93)

3. Controlling dimmers and fixtures - Page 125

Pearl 2008 Manual - 16th July 2007

CHAPTER THREE

3. Controlling dimmers and fixtures

This chapter contains: Selecting fixtures and dimmers for control;

changing attributes of the selected fixtures; using groups; selecting

fixtures one at a time; the align and flip buttons; killing off a fixture;

entering levels as numbers; the ML menu and tracking; viewing the

output.

When you are programming a show, and sometimes when you are

running a show, you need to manually control the fixtures and dimmers

to set the intensity, position, colour, etc. To do this you first select the

fixtures you want to change using the Swop buttons, then you set the

attributes of those fixtures using the Wheels and Attribute buttons.

3.1 Create

3.1.1 Selecting fixtures and dimmers for control

To select the fixtures or dimmer channels that you want to control, you

use the handle Swop buttons. You can select fixtures or dimmers

individually, or several at once.

You can control dimmer channels and fixture intensity directly from the

fader control of the handle, or select the channels as described below

and use the Dimmer attribute.

1> Press the handle Swop buttons for the fixtures you want. The LED

in the Swop button comes on for selected fixtures (they are also

shown in dark blue on the VDU screen)

2> To select a range of fixtures, hold down the Swop button for the

first fixture then press the Swop button for the last fixture.

Here are some other things to know:

• Press the red Locate button, or ML Menu then A [Locate Fixture]

to position the selected fixtures in open white at a central position

(dimmer channels go to 100%). These values are not loaded into

the programmer - they won’t be saved in a memory unless you

modify the fixture.

• If you want to light up a fixture without moving its position, use

ML Menu then B [Locate Fixture no Pan & Tilt]”.

• You can deselect a fixture by pressing the fixture select button

again.

• Once you have changed any attribute, pressing a handle Swop

button will deselect all fixtures and start the selection process

again.

• You can select fixtures on another page by pressing one of the

“Pages of Fixtures” buttons.

• If you have fixtures patched to the top faders you can select them

by holding down the AVO button and pressing the Swop button of

the fader below. This also works on the Pearl Tiger even though

the top faders are not fitted.

1 2 ... 88 89 90 91 92 93 94 95 96 97 98 ... 205 206

Komentáře k této Příručce

Žádné komentáře

Chauvet Tiger DMX 60 Návod k obsluze Strana 93

Komentáře k této Příručce